HPI Nitro Star T3.0 Engine 15107

This is the HPI Nitro Star T3.0 Engine for use with the RTR Nitro RS4 3 Evo+

Features

• HPI Nitro Star T3.0 Engine 15107

• 1-piece black crankcase

• 6.5mm Rotary Carb

• Non-ringed/ ABC-type engine

• Standard crankshaft

• Side exhaust

• Heatsink Head

Specifications

• Height from crankcase bottom to top of cylinder head: 3.8" (96mm)

• Width including mounting tabs: 1.57" (40mm)

• Width below mounting tabs: 1.2" (31mm)

• Width between mounting holes same side: 0.43" (11mm)

• Width between mounting holes opposite side: 1.2" (31mm)

• Width of exhaust opening: 0.87" (22mm)

• Height of exhaust opening: 0.17" (4.2mm)

• Distance between muffler mounting holes 1.1" (28mm)

• Crankshaft Thread Size: 1/4-28

• Bore x Stroke: 16.8 x 13.6mm

• Displacement: 0.18 cu in (3.01cc)

• Maximum Power: 2.2PS/31,000 RPM

Contents

• One assembled engine with glow plug

• One instruction manual and sticker sheet

• One air filter with instruction sheet

• Three zip ties

• One hex wrench

Requirements

• Fuel with 20%-25% Nitromethane and 18% (minimum) oil content

Comments

•  The factory setting of the needle valves are as follows:

• High speed needle: Flush with the carburetor body

• Low Speed Needle: Flush with the carburetor body