HPI RS4 3 Drift Nissan Silvia RTR 10071
This is the 1/10 scale glow powered, radio controlled, on-road
HPI Nitro RS4 3 Ready to Run Drift Car with the Nissan Sylvia Body.
Features
-
HPI RS4 3 Drift Nissan Silvia RTR 10071
-
Chassis: .098" (2.5mm) thick anodized
aluminum, purple in color, drift optimized with repositioned center
of gravity to help car rotate smoothly for easy drifting, 7.5"
(190mm) width accepts all 190 and 200mm bodies
-
Drive: Four wheel shaft drive
-
Radio: HPI TF-1 27MHz AM 2-channel pistol grip
with dual rate, steering and throttle trim, two standard servos,
enclosed receiver/ battery box, transmitter does not have charge
jack
-
Engine: HPI G3.0 .18 cu in (3cc) with
pull-start, foam air filter rotary carburetor and glow plug
-
Exhaust: Composite construction with high-flow
aluminum header and rear exit exhaust tube
-
Fuel Tank: 2.53oz (75cc), flip top cap
-
Clutch: 2-shoe
-
Transmission: Single-speed
-
Ball Bearings: Full set included
-
Shocks: Four oil-filled, with drift rate
springs
-
Main Gear: 47 tooth composite
-
Clutch Bell: 18 tooth steel
-
Gearboxes: Sealed, front and rear
-
Differentials: Sealed, with metal bevel gears,
limited slip front differential
-
Brakes: Single disc, fiber construction
-
Tires: Type A drift radial 1" (26mm) wide,
2.5" (64mm) diameter
-
Wheels: Volk TE-37 five spoke chrome wheels 1"
(26mm) wide, 2" (51mm) diameter
-
Body: Painted and trimmed Nissan Sylvia with
racing wing and all sponsor and body trim decals
-
Bumper: Front foam
-
Suspension: Four wheel independent
-
Caster: Adjustable, caster/toe-in refers to
the angle of the front suspension when viewed from the side of the
car in relation to the chassis
-
Camber: Adjustable, camber refers to the angle
of the tops of the tires from vertical when viewed from front or
behind vehicle
-
Steering: Bellcrank with servo saver
-
Warranty: Two year limited, valid only in the
USA, Canada and South America
Specifications
-
Vehicle-
-
Length: 17.8" (453mm)
-
Width: 7.5" (190mm)
-
Height: 4.9" (125mm)
-
Weight: 3.8lbs (1750g)
-
Wheelbase: 10" (254mm)
-
Front Tread: 6.8" (173mm)
-
Rear Tread: 6.9" (175mm) wheels on-center side
to side
-
Front Track: 7.7" (195mm)
-
Rear Track: 7.75" (197mm)
-
Ground Clearance:
-
Body-
-
Length: 17.8" (453mm)
-
Width: 7.9" (202mm) at rear wheels (widest
point) 7.7" (195mm) ahead of front wheels (thinnest point)
Package
Contents
-
HPI Nitro RS4 3 Ready to Run Drift Car with the Nissan Silvia Body
G3.0 .18 cu in (3cc) engine with pull starter, glow plug, 2-channel
radio with two standard servos, decals and instructions
Requirement
-
Radio Batteries: 12 AA size
-
Fuel bottle, glow starter and miscellaneous
track equipment
-
Fuel: 2-stroke glow fuel with 10%-15%
nitromethane, 16% lubricant
|
|
