Multiplex Easy Star Kit 54" M214192
This is a radio controlled, electric powered, foam construction
Multiplex Easy Star Airplane Model Kit
For Beginner to Intermediate Modeler/Fliers.
The Easy Star was designed for first time pilots in mind, and offers incredibly stable flight characteristics and durability. Powered by a powerful Permax Speed 400 motor mounted on the top so hard landings won’t break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex’s durable ELAPOR Foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash can!
Features
-
Multiplex Easy Star Kit 54" M214192
-
Construction: Elapor foam on
the fuselage, wing and tail section
-
Wings: two-piece, foam
construction, blue in color
-
Radio compartment: Foam
-
Landing gear: No landing
gear,model lands on its belly
-
Hardware: Pushrods and other
hardware included
-
Motor Mount: Molded into the
foam fuselage 400 size Permax motor (MPUG3345) with high current socket and
lead 5" diameter pusher prop with black spinner (prop faces the rear of the
airplane)
-
Colorful Easy Star logo decals
(must be cut out and applied)
-
Ready to fly in two to six
hours
Specifications
-
Wingspan: 54" (1370mm)
-
Wing Area: 372 sq in (24 sq
dm)
-
Weight: 24oz. (680 g)
-
Length: 34" (870mm)
-
Airfoil: Flat bottom, high
wing
-
Center of Gravity: 3.07"
(78mm) Back from the wing's leading edge at the fuselage sides.
-
Control Throws-
-
Elevator: Up & Down 3/16"
(5mm)
-
Rudder: Right & Left 3/8"
(10mm)
Contents
-
Foam fuselage, wings, and tail section, 400 size motor (direct drive)
with connector and lead (must be soldered to motor), prop, spinner,
hardware package, decals and illustrated instructions.
Requirements
-
3-channel radio (throttle,
rudder, and elevator control) with 2 micro servos
-
12 amp speed control
-
6 or 7 cell battery from 500
to 1500mAh with the proper connector (for the above listed speed control use
this connector - MPUC8513
-
Charger for the battery with
proper connector - MPUC8514
-
Miscellaneous building
equipment
Comments
-
This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. Use only a medium CA (CA+) glue and activator. Do not use CA glue designed for polysty- rene foam. If extra props are needed, use MPUA2293.
The manufacturer has made a running change to the color of the wings in this kit. The new color of the wings are grey and NOT blue.
|
|
