Multiplex M264235 Easy Cub Receiver Ready

This is the radio controlled, electric powered, receiver ready Multiplex EasyCub Trainer Airplane. For Beginner Modeler/Fliers.

Features

• Multiplex M264235 Easy Cub Receiver Ready

• Construction: Elapor foam white in color

• Wings: Two-piece all foam

• Radio Compartment: Accessible under wing

• Servos: Two Multiplex Tini-S

• Brushless Motor: Himax C 2816-1220

• ESC: MULTIcont BL-27/II

• Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter, tailgear, prebent 0.039" (1mm) diameter wire Wheels: Main, two foam 2" (51mm), foam 1" (25.4mm) tailwheel

• Canopy: Elapor foam

• Decals: Peel and stick application with yellow and blue accents and black window detail

• Building Time: Ready to fly in several hours

Specifications

• Wingspan: 55" (1397mm)

• Wing Area: 565 sq in (36.5 sq dm)

• Weight: 850.49g (30oz)

• Wing Loading: 7.53 oz/sq ft) (23 g/sq dm)

• Length: 38" (965mm)

• Airfoil: Flat bottom high-wing placement

• Center of Gravity: 3.1" (80mm) Back from the wing's leading edge at the fuselage

• Control Throws-

• Elevator: Up 0.59" (15mm), Down 0.47" (12mm)

• Rudder: Right to Left 0.59" (15mm)

Package Contents

• Pre-molded wings, fuselage and tail assemblies, pushrods, two servos, motor, ESC, propeller, all hardware, pre-bent 0.039" (1mm) wire landing gear, two 2" (51mm) main wheels, 1" (25.4mm) tailwheel, plastic motor mount, two fiberglass wing spars, decal sheet and photo-illustrated instructions

Requirements

• Radio: 3 channel

• Misc. Items: Building and field equipment

Comments

• This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer.