| Features
O.S. 18CV-RX (S) w/11J Rotary Carb
OSMG2105 This is the O.S. Max .18CV-RX(S)
Engine with 11J rotary carburetor and pull starter. Good for all ready-to-run 1/10
scale cars & trucks that require a pull-start power plant. Especially good for
off-road trucks. Differs from OSMG2102 in crankshaft length and carb type. Fits all Traxxas® vehicles
w/side-exhaust engines and the Associated RC10GT (will not fit GT2) Direct fit
for the Pro 15 not the 2.5.
 Features
-
O.S. 18CV-RX (S) w/11J Rotary
Carb OSMG2105
-
Larger displacement and more
power in a .15 size crankcase
-
Short shaft crankshaft for use
on T-Maxx and Associated vehicles
-
Rotary carburetor with two
screwdriver-adjustable needles, mixture control screw, 360° fuel inlet, and
big 6.5mm bore for more torque
-
True ABC construction with CAD
designed 3-port liner
-
Machined, aluminum piston
boosts performance and enhances durability
-
Standard ball bearing
suppported crankshaft with enlarged fuel ports for smoother air and fuel
flow
-
Larger, thicker rear bearing
handles racing loads with ease
-
High volume #203 air filter
assembly with two pre-oiled foam elements
-
Side Exhaust
-
Two year warranty
Specifications
-
Bore: 0.63" (16.0mm)
-
Stroke: 0.59" (15.0mm)
-
Displacement: .18 cu in
(3.0cc)
-
Practical RPM: 3000-32,000
-
Power Output: 1.35 PS/28,000
RPM
-
Weight: 10.4oz (295.5g)
-
Width between mounting holes
same side: 0.4" (11mm)
-
Width between mounting holes
opposite side: 1.2" (31.4mm)
-
Crankcase width: 1.6" (40mm)
-
Distance from starter to drive
hub: 2.9" (74.8mm)
-
Distance from starter to end
of crankshaft: 3.4" (87.8mm)
-
Distance from center of
crankcase to drive hub: 1.6" (41mm)
-
Height/bottom of crankcase to
top of cylinder head: 4" (100.9mm)
-
Height/center of crankshaft to
top of cyinder head: 3.2" (80.9mm)
Package Contents
-
One O.S. Max .18CV-RX(S)
engine with, 11J carb, pull starter, #8 glow plug, air filter assembly with
two elements, mounting spacers, four 3 x 14mm phillips head screws,
instruction manual
Requirements |
|
