O.S. FS62V Ring w/Muffler 30600

This is the FS62V Four Stroke Ringed Engine with Muffler from O.S. Engines.

Features

• O.S. FS62V Ring w/Muffler 30600

• New head design with angled valve layout and individual valve covers

• Machined aluminum pushrod guides

• Jet stream silencer produces an authentic exhaust sound that is ideal for scale airplanes

• Same mounting dimensions as the O.S. 56FS-a

• Carburetor is reversible 180° and mounted on the center line, making it easy to install in a variety of models

• Two year limited warranty beginning at date of purchase

Specifications

• Displacement: 0.617cu in (10.11cc)

• Bore: 0.98" (25.0mm)

• Stroke: 0.81" (20.6mm)

• Practical RPM: 2400 - 11,000

• Power Output: 1.12 hp/11,000 rpm

• Engine Weight: 15.6oz (442g)

• Muffler Weight: 1.55oz (44g)

• Cranshaft Size: 1/4-28

• Distance between Mounting Hole Centers Same Side: 0.69" (17.5mm)

• Distance between Mounting Hole Centers Opposite Side: 1.7" (44mm)

• Length between Front Mounting Hole and Drive Washer: 2" (51.3mm)

• Width at Mounting Tabs: 2" (51mm)

• Crankcase Width Below Mounting Tabs: 1.3" (34.1mm)

• Height from Mounting Tab to top of Valve Cover: 3.4" (87.4mm)

• Height from Crankcase Bottom to top of Valve Cover: 4.1" (105.1mm)

• Length from Drive Washer to Center of Engine: 2.4" (60mm)

• Length from Drive Washer to Crankshaft End: 1.4" (35.5mm)

• Distance/Crankshaft Center to Throttle Lever Center: 1.02" (26mm)

• Carburetor Settings-

• Needle Valve: 3 - 3.5 turns from fully closed

• Mixture Control Valve: 45° clockwise to lean the idle mixture, turn 90° counterclockwise to substantially enrich mixture, then back 45°

Contents

• FS62V Engine with "F" Glow Plug, Jet Stream Silencer, Header and Instruction Manual

Requirements

• Fuel: 5-20% nitro with 18% lubricant content

• Propeller: Sport & aerobatic; 12x7-8, 13x6

•                Scale; 13x7-8, 14x6

•    (break-in engine with prop intended for use on model)

• Electric starter, glow starter and field equipment