Ofna 14622 1/10 Hyper 10TT 4x4 RTR
This is the electric powered,
radio controlled, 1/10 scale, Ready to Run Hyper-10TT 4x4 Truggy from Ofna.
Features
-
Ofna 14622 1/10 Hyper 10TT 4x4
RTR
-
Chassis: 6061 aluminum chassis
.11" (3mm) thick with integrated low center of gravity diff housings
-
Drive: Four wheel shaft with
front CVAs
-
Shocks: Aluminum threaded
body, oil-filled
-
Shock Towers: Aluminum, .11"
(3mm) thick
-
Differentials: Three sealed,
oil filled
-
Ball Bearings: 18 total
-
Body: Clear low profile
advanced forward truck
-
Battery Holder: Velcro strap
for most battery configurations
-
Hinge Pins: Captured pins and
upright camber adjustment
-
Suspension: Pivot ball with
front and rear sway bars
-
Wing: White plastic
-
Tires: Pin spike
-
Wheels: White dish
-
Steering: Ballcrank with
spring adjusted servo saver
-
Caster: Adjustable,
caster/toe-in refers to the angle of the front suspension when viewed from
the side of the car in relation to the chassis
-
Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed from
front or behind vehicle
Specifications
-
Vehicle-
-
Length: 14.5" (368mm)
-
Width: 12.25" (311mm)
-
Wheelbase: 11" (279mm)
-
Height: 6" (152mm)
-
Body-
-
Length: 13.9" (354mm)
-
Width: 5.7" (145mm)
-
Height: 3.8" (96mm)
Contents
-
Ready to Run Hyper-10TT 4x4
Truggy 2.4GHz radio, motor, decals, ESC, painted body, 13 tooth pinion and
photo-illustrated manual
Requirements
-
Battery: 6-cell stick, 7-cell
hump or 2C LiPo pack
-
Charger: For selected battery
type
-
AA Batteries: 12 AA
-
Building and track equipment
Comments
-
For Replacement Ball Bearings
use:
-
Qty. Size
Location
Qty. Bearing Set
-
4
10x15mm Front & Rear Diff
2 DTXC1595
2 10x15mm Center
Diff
1 DTXC1595
4 5x11mm
Front & Rear Gearbox 2 DTXC1547
2 10x15mm Front
Hubs
1 DTXC1595
2 6x13mm
Front Hubs
1 DTXC1573
2 10x15mm Rear Hubs
1 DTXC1595
2 6x13mm
Rear Hubs
1 DTXC1573
|
|
