Ofna 34303 DM-1 Spec PF8-GT Body Kit

This is the 1/8 scale glow powered, radio controlled, 80% assembled Ofna DM-One Spec On-Road Touring Car with the PF8-GT Body.

Features

• Ofna 34303 DM-1 Spec PF8-GT Body Kit

• Chassis: CNC 6061 aluminum

• Drive: Four wheel shaft drive, front universals

• Fuel Tank: 4.2oz (125cc), flip top cap

• Clutch: 3-shoe aluminum racing type

• Radio Tray: Carbon fiber, low CG, sealed radio and battery box, special transponder mount

• Transmission: Two-speed, shoe type

• Ball Bearings: Full set, sealed

• Shocks: Four oil-filled, 13mm diameter hard anodized, threaded aluminum bodies, mounted horizontally with CNC shock mount heat sink

• Main Gear: 44 tooth and 48 tooth, nylon construction

• Clutch: Three-shoe composite

• Clutch Bell: 16 tooth and 20 tooth, steel construction

• Gearboxes: Enclosed

• Differentials: Planetary

• Brakes: Single disk with high performance pads

• Tires: High traction treaded with foam inserts 1.6" (42mm) wide, 3.9" (100mm) diameter

• Wheels: Black plastic multi-spoke design 1.6" (42mm) wide, 2.4" (60mm) diameter

• Body: Clear untrimmed PF8-GT body and rear wing

• Bumpers: High impact plastic and foam front bumper

• Suspension: Front and rear pushrod sealed pivot ball type with boot covers, front and rear adjustable blade sway bars, adjustable upper and lower roll centers and adjustable stops

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Steering: Hard coated steering rack with laydown servo position and servo saver

Specifications

• Vehicle-

• Length: 21.5" (546mm)

• Width: 13.19" (335mm)

• Weight: 8.3lbs (3765g)

• Wheelbase: 13" (330mm)

• Tires- F/R

• Body-

• Length: 23.2" (590mm)

• Width: 10.7" (273mm)

• Height: 5.5" (140mm)

Contents

• Ofna DM-One Spec Touring Car with four oil-filled shocks, decals 2 speed clutch bell, 2 speed spur gear, body, wing, wheels, tires, sealed bearings, 4.2oz (125cc) fuel tank, 80wt shock oil, 10,000wt and 50,000wt diff oil, and instructions

Requirements

• 3.5cc (.21 Class) rear exhaust engine

• Minimum 2-Channel radio system with 2 servos, high speed servo suggested for steering

• Glow Starter: 1.2 volt

• Paint: Polycarbonate safe spray or brush-on

• Misc. Items: Fuel bottle, building and track equipment

• Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-

• Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the

• past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the

• percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection.

Comments

• For Replacement Ball Bearings use:

• Qty. Size Location Bearing Set Qty.
  4 4x8mm Flanged steering drag link DTXC1517 2
  4 6x10mm bellcrank DTXC1561 2
  4 8x16mm front and rear diffs DTXC1585 2
  4 8x16mm front and rear gear boxes DTXC1585 2
  8 5x8mm front and rear shock stays DTXC1523 4
  2 8x12mm Flanged two speed DTXC1582 1
  2 8x16mm two speed DTXC1585 1
  1 5x8mm brake cam DTXC1523 1
  1 5x8mm clutch bell DTXC1523 1
  1 5x10mm clutch bell DTXC1535 1