Ofna 34315 1/8 Nitro Dirt Oval Kit

This is the radio controlled, glow powered, 1/8 scale, 80% preassembled Ofna Dirt Oval GTP Car Kit.

Features

• Ofna 34315 1/8 Nitro Dirt Oval Kit

• Chassis: Hard coated aluminum offset chassis, 0.12 (3mm) thick

• Drive: Four wheel shaft

• Shocks: Oil filled, 13mm diameter aluminum shock bodies

• Shock Towers: Hard anodized aluminum, 0.12" (3mm) thick, designed for oval chassis

• Spur Gear: 51 tooth plastic

• Ball Bearings: Full set included

• Tuned Pipe: Aluminum, black in color

• Air Filter: Large diameter foam

• Clutch: Three shoe composite construction

• Clutch Bell: 16 tooth hardened steel

• Wheels: White in color, V-spoke design, 17mm hex 1.6" (41mm) wide, 3.2" (80.9mm) diameter

• Tires: Special dirt oval tread 1.6" (41mm) wide, 3.1" (79mm) inner diameter with foam inserts

• Brake: Single disc

• Suspension: Adjustable pivot ball front and rear with front CVAs, front and rear sway bars

• Fuel Tank: 5.1oz (150cc)

• Caster: Adjustable front and rear, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Bumper: Front foam

Specifications

• Vehicle-

• Length: 23.8" (604mm)

• Width: 8.38" (213mm)

• Height: 5.98" (152mm)

• Body-

• Length: 24.8" (630mm)

• Width: 12.25" (311mm)

• Height: 5.5" (140mm)

Contents

• Ofna Dirt Oval GTP Car Kit, tuned pipe, tires, wheels, foam inserts, body, decals, air filter and instruction manual

Requirements

• Radio: 2-channel with two servos (high torque servo required for steering

• Engine: .21 w/rear exhaust and pilot shaft (if using a rear exhaust with full threaded shaft a pilot shaft must be purchased - OFNC1009

• Glow Starter: 1.2 volt

• Misc. Items: Fuel bottle, building and track equipment

Comments

• For Replacement Ball Bearings use:

• Qty. Size Location Qty. Bearing Set

• 4 7x19mm Fr & Rear Diff 2 DTXC1579

• 4 6x13mm Fr & Rear Gear Cases 2 DTXC1573

• 8 8x16mm Fr & Rear Hubs 1 DTXC1587

• 2 6x13mm Pinion Gear 1 DTXC1573

• 2 7x19mm Center Mount 1 DTXC1579

• 2 5x8mm flanged Brake Cam 1 DTXC1527

• 2 5x10mm Clutch 1 DTXC1535