Phoenix Models Giles 202 .46 GP/EP
ARF PMMA1535
This is the radio controlled, glow
or electric powered, Almost-Ready-to-Fly Giles G-202 .46 scale Aerobatic
Airplane.
Recommended for modelers who have
had trainer airplane experience.
Features
-
Phoenix Models Giles 202 .46
GP/EP ARF PMMA1535
-
Construction: Built-up balsa
and plywood
-
Covering: Pre-applied Oracover,
color scheme is mostly White on the fuselage and wings with Red, Yellow, and
Blue accents with
-
Red wheel pants
-
Wings: Two-piece wood, must be
joined before installation
-
Radio Compartment: Plywood
reinforced, easily accessible over wing
-
Cowling: Painted fiberglass
-
Canopy: Clear, single
-
Wheel Pants: Painted
fiberglass
-
Cockpit features: Detailed and
painted pilot figure
-
Landing gear: Pre-bent 3/16"
(4mm) aluminum with 2-1/4" (57mm) treaded rubber main wheels and one 1"
(25mm) rubber tail wheel with
-
pre-bent 0.078" (2mm) thick
wire
-
Aileron Control: Dual servo,
standard size and torque required
-
Hardware: Hinges, wing bolts
and all other required fasteners included
-
Motor Mount: Nylon
Specifications
-
Wingspan: 53.1" (1350mm)
-
Flying Weight: 6.1lbs (2780g)
-
Specs such as Wing Area and
Wing Loading are not provided by the manufacturer
-
Length: 53.9" (1380mm)
-
Airfoil: Fully-symmetrical,
mid wing
-
Center of Gravity: 4.1"
(105mm) Back from the wing's leading edge at the fuselage sides.
-
Control Throws-
-
Ailerons: Up & Down
0.40" (10mm)
-
Elevator: Up & Down
0.59" (15mm)
-
Rudder: Right & Left
1.19" (30mm)
Contents
-
Prebuilt and pre-covered wings
fuselage and tail section aluminum main landing gear, tailwheel wire, nylon
adjustable engine mount, main and tail wheels, pre-bent pushrods, hardware
package, fiberglass cowling and wheel pants, clear canopy, pilot figure,
decals, photo-illustrated instructions,
Requirements
-
For glow operation;
-
Engine: .46 cu in (7.5 cc)
2-stroke
-
OR .53 cu in (8.7cc) 4-stroke
-
Muffler: Standard type
included with engine
-
Servos: Five, 42 oz/in torque
minimum (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
-
Propeller: 11x6
-
For electric operation;
-
Brushless Motor: Great Planes
Rimfire .46 42-60-800, GPMG4725
-
ESC: 60A
-
Propeller: 12x8 or 13x6.5
-
LiPo Battery 4S (14.8V) 30C,
at least 4000mAh
-
Servos: Four, 42 oz/in torque
minimum (2-ailerons, 1-elevator, 1-rudder)
-
For glow and electric
power;
-
Radio: 4-channel
-
Servo Extension: One 6"
(152mm) for ailerons
-
Y-Harness: One for aileron
servos
-
Misc. Items: 2" (51mm)
spinner, 1/4" foam rubber padding, building and field equipment
-
Servo Extension: One 6"
(152mm) for ailerons
-
Y-Harness: One for aileron
servos
-
Misc. Items: 2" (51mm)
spinner, 1/4" foam rubber padding, 3' medium fuel tubing, fuel filter,
propeller, building and field equipment
Comments
|
|
