Phoenix Models Strega Mustang .40-.46 ARF PMMA0340

This is a Radio Controlled, Glow Powered, Almost-Ready-to-Fly, Phoenix Models Strega .40 Sport Scale Airplane. For Intermediate to Advanced Modeler/Fliers.

Features

• Phoenix Models Strega Mustang .40-.46 ARF PMMA0340

• Construction: Balsa and plywood

• Wings: Two-piece all wood

• Covering: Factory applied Oracove

• The covering is all Orange except for the stabilizer top surface, it has a White stripe on each side

• Radio Compartment: Preinstalled servo tray

• Cowling: Pre-painted, Orange, fiberglass

• Canopy: Painted Silver and preinstalled

• Landing Gear: Fixed gear

• Aileron Control: Dual servos

• Building Time: Ready to fly in only 4-6 hours

Specifications

• Wingspan: 54.5" (1385mm)

• Weight: 5.2lb (2360g)

• Length: 46.6" (1185mm)

• Specs such as Wing Area and Wing Loading are not provided by the manufacturer

• Airfoil: Fully symmetrical, low-wing

• Center of Gravity: 4-15/16" (125mm) Back from the wing's leading edge

• Control Throws-

• Elevator: Up & Down 1/4" (6.35mm)

• Rudder: Right to Left 1-3/16" (30mm)

• Ailerons: Up & Down 1/4" (6.35mm)

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods,
  pre-bent 5/32" main landing gear, 1/16" tailwheel wire,
  2-1/4" (57mm) main wheels, 1" (26mm) tailwheel, metal one-piece
  engine mount 10oz (296cc) fuel tank, 2-1/4" (57mm) spinner, wood
  servo tray and wing joiner, hardware package, photo-illustrated
  instructions, and foam rubber

Requirements

• Engine: .40-.46 cu in (6.5-7.5cc) 2-stroke

• OR .48-.53 cu in (7.9-8.7cc) 4-stroke

• Radio: 4- Channel

• Servos: 5- Standard, 1-throttle, 1-rudder, 1-elevator, 2-aileron

• Misc. Items: Glow plug, medium fuel tubing, fuel filter, propeller, building and field equipment.

Comments

• If a replacement fuel tank is needed, order the Sullivan 10oz flex
  tank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
  Some minor trimming and modifications may be required.