Tamiya 46604 XBS Mitsubishi Lancer Evo X TT-01 Type-E Sp

This is the electric powered 1/10 scale, ready to run XBS Mitsubishi Lancer Evo X On-Road Car.

Features

• Tamiya 46604 XBS Mitsubishi Lancer Evo X TT-01 Type-E Sp

• Chassis: Streamlined version of TT-01 type E chassis-compatible with a variety of Tamiya Option Parts

• Drive: Four wheel shaft drive

• Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541

• Radio: 2-channel pistol grip 27MHz Tamiya Adspec AM, standard size and torque steering servo

• Motor: 540 motor with pre-attached leads

• Ball Bearings: Installed in differentials, bushings in wheel hubs

• Shocks: Friction, plastic body

• Gearbox: Sealed, front and rear

• Differentials: Bevel gear, ball bearing equipped

• Transmission: Single speed

• Body: Painted white and trimmed with mirrors, rear wing

• Tires: Treaded 0.94" (24mm) wide, 2.6" (65.5mm) diameter

• Wheels: 10 spoke gray 2.0" (52mm) outer diameter, 0.94" (24mm) wide

• Bumper: Front foam

• Suspension: Independent double wishbone

• Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Steering: Bell-crank type with servo saver

Specifications

• VEHICLE-

Length: 15.7" (400mm)

Width: 7.2" (183mm)

Height: 5.5" (140mm)

Wheelbase: 10.1" (257mm)

• BODY-

Length: 17.4" (443mm)

Width: 7.4" (187mm)

Height: 4.8" (123mm)

Contents

• Tamiya Mitsubishi Lancer Evo X On-Road Car, 540 motor, ESC, painted and trimmed body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, decals, instructions and AM radio

Requirements

• Radio Batteries: 8 AA size (for transmitter)

• Battery: 6-cell stick pack with standard connector

• Charger: AC/DC timed or peak for 6-cell battery

• Misc. Items: Building and track equipment

Comments

• For replacement, or to upgrade to Ball Bearings use:

 Qty.     Size             Location               Qty.     Bearing Set

  2     5x11mm        Front Hubs               1         DTXC1547

  2     5x11mm        Rear Hubs                1         DTXC1547

  2     8x12mm        Front Diff                  1         DTXC1581

  2     8x12mm        Rear Diff                  1         DTXC1581

  2     5x11mm        Fr Driveshaft Joint      1        DTXC1547

  2     5x11mm        Rear Driveshaft Joint  1        DTXC1547

• Body shown on box is painted white.