Team Associated 637 Reedy LiPo M11X 7.4V 2500mah Tx Battery

This is the Reedy LiPo 2500mAh 7.4V TX LiPo Battery for M11X TX

Features

• Team Associated 637 Reedy LiPo M11X 7.4V 2500mah Tx Battery

• For your Airtronics/Sanwa M11X radio

• Balance connector

• Durable case designed to protect battery

Specifications

• Length: 2 7/8" (73mm)

• Width: 1 7/8" (46.6mm)

• Height: 1/2" (12.7mm)

• Weight: 3.5oz (100g)

• Lead Wire Size: 22 AWG

• Lead Wire Length: 4 1/4" (108mm) approximate

• Min. Discharge Volts: 6.0V

• Charge rate: 2.5 amp

Contents

• One Reedy LiPo 2500mAh 7.4V LiPo TX Battery

Requirements

• A Lipo charger like the Duratrax ICE (DTXP4170) and a balancing module like the Equinox Lipo Cell Balancer (GPMM3160)

Comments

• ALWAYS use a LiPo-approved charger

• ALWAYS use a LiPo Cell Balancer

• NEVER Charge over 4.20V per cell

• NEVER Charge at currents greater than 1C

• NEVER Charge through the "To ESC or "DISCHARGE" lead

• NEVER Trickle Charge

• NEVER allow to Discharge below 2.5V per cell

• NEVER disassemble or modify pack wiring in any way or puncture cells

• NEVER place on combustible materials or leave unattended during Charging

• ALWAYS charge in a fireproof location

• ALWAYS set charger's output volts to match battery volts

• ALWAYS keep out of reach of children