Team Associated LRP41555 LRP
Pulsar Touch Comp Charger
This is the LRP Pulsar Touch DC
Powered Competition Charger, Discharger and Balancer from Team Associated.
Features
-
Team Associated LRP41555 LRP
Pulsar Touch Comp Charger
-
Charges 1-4 cell LiPo/LiFePo
with automatic (LiPo/LiFePo) cut-off, and 1-10 cells (NiMH/NiCd) with
adjustable Delta-Peak detection, linear or optional 5-step charge mode
-
Integrated LiPo/LiFePo
balancer
-
Blue backlit touch-screen
graphics display
-
Intuitive program structure
with graphical user interface, allows precise adjustment of all parameters
-
Adjustable discharge current
and cut-off voltage
-
User Profile Memory, 5 factory
pre-set profiles can be customized, re-named and saved in memory
-
Receiver simulator port for
checking speed controls and servos
-
USB connection with wire for
data download to PC and firmware update
-
Brushless motor sensor port
for sensor check and RPM measurement
-
Protection against output
reverse polarity, short circuit, input voltage error and over charge
Specifications
-
Dimensions: 6.2 x 6.8 x 2.7"
(158 x 172 x 68mm)
-
Weight: 25.4oz (720g)
-
DC Input Voltage: 11-15V
-
Integrated LiPo Balancer: 2S -
4S
-
Charging Mode: Linear, 4 step,
LiPo LiFePo
-
Charging Capacity: NiMH/NiCd
1-10 cell
-
LiPo LiFePo 1-4 cell
-
Charge Current: 0.1 - 12A
-
Trickle Current: 0 - 0.55A
-
Delta Peak: 1-200mV
-
Autostart Timer: 0-99 min.
-
Storage Charge and Cycle
Modes: Yes
-
Discharge Current: 0.1 - 20.0A
35A pulse
-
Discharge Cut-Off Voltage:
NiMH/NiCd 0.1 -1.3V/cell
-
LiPo/ LiFePo 2.0 - 4.2V/cell
-
Internal Cooling Fans: Two
-
Acoustic Signal: Buzzer
-
Voltage Calibration Mode: Yes
-
Multi Protection System: Yes
-
DC Input Connection: 4mm
connectors
-
Output Connection: 4mm jacket
with alligator clips
Contents
Requirements
Comments
|
|
