Thunder Tiger 1/10 Tomahawk VX Nitro 2.4G RTR Nissan GT-RR35

This is the glow powered, 2.4GHz radio controlled, ready to run, 1/10 scale GTR Tomahawk VX Touring Car from Thunder Tiger.

Features

• Thunder Tiger 1/10 Tomahawk VX Nitro 2.4G RTR Nissan GT-RR35

• Chassis: Anodized aluminum alloy 0.12" (3mm) thick

• Drive: Four wheel shaft drive fully ballraced

• Engine: Pro-18BX 18cu in (3.0cc) with pull starter (TTRG0018), glow

• plug and foam air filter

• Exhaust: Aluminum tuned pipe, polished natural finish

• Radio: Ace Cougar PS3 2.4GHz 3-channel with two standard servos

• Bumper: Front foam

• Differentials: Bevel gear

• Transmission: Two-speed automatic

• Clutch: Two shoe composite

• Steering: Bellcrank type with servo saver and one-piece resin steering turnbuckles

• Shocks: Composite body, oil filled

• Body: Nissan GT trimmed and painted with decals for lights, grille and body trim

• Wheels: Chrome plated plastic 1.02" (52mm) diameter, 1.02" (26mm) wide

• Tires: Slick rubber 1.02" (26mm) wide, 2" (52mm) diameter with foam inserts

• Ball Bearings: Full set, sealed

• Suspension: Double wishbone

• Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Non-adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Warranty: Thunder Tiger guarantees this truck to be free from defects in both material and workmanship. This warranty does not cover any components damaged by use or modification. A part or parts missing from the kit must be reported within 60 days of purchase. No part or parts will be sent under warranty without proof of purchase

Specifications

•   Vehicle;

• Length: 17" (432mm)

• Width: 7.87" (200mm)

• Height: 4.33" (110mm)

• Weight: 3.63lbs (1650g)

• Wheelbase: 10.43" (265mm)

•   Body;

• Length: 17.6" (448mm)

• Width: 7.9" (200mm)

• Height: 4.2" (107mm)

Contents

• RTR 1/10 scale Tomahawk Touring Car with .18 cu in engine, 2.4GHz radio, painted body and instruction manual

Requirements

• Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break-in)

• AA Batteries: 12, 8 for transmitter 4 for battery box

• Building and track equipment

Comments

• For Replacement Ball Bearings use:

•   Qty.  Size             Location               Qty. Bearing Set

•    2      8x14mm      Fr Diff                   1     DTXC1583

•    2      8x14mm      Rear Diff               1     DTXC1583

•    2      5x14mm      Transmission

•    2      5x14mm      Fr Drive Axle

•    4      10x15mm    Fr Hubs                  2     DTXC1595

•    4      10x15mm    Rear Hubs              2     DTXC1595

•    4      5x8mm       Steering Bellcrank    2     DTXC1523

•    1      5x8mm       Clutch                     1     DTXC1523

•    1      5x10           Clutch                     1     DTXC1535