Thunder Tiger 2382 OBL 29/37-10H Motor E325 V1/V2

This is the Thunder Tiger Ripper OBL 29/37-10H Series Outrunner Brushless Motor.

Features

• Thunder Tiger 2382 OBL 29/37-10H Motor E325 V1/V2

• Stong magnets for high output torque and high temperature rating

• Dual ball bearings shaft support

• Cooling mechanical design that allows you to get the most efficiency out of the motor

• 18 month warranty

Specifications

• Motor Diameter: 1.12" (28.5mm)

• Motor Length: 1.18" (30mm)

• Shaft Diameter: 1/8" (3.2mm)

• Shaft Length: 1.65" (42mm)

• kV Rating: 3700 rpm/V

• Weight: 2.33oz (66g)

• Input Voltage: 11.1V (3S LiPo)

• Max Constant Current: 35A

• Max Surge Current: 40A/60s

• Internal Resistance: 27 milli-ohms

Contents

• One Thunder Tiger Ripper OBL 29/37-10H outrunner brushless motor

• Three 3.5mm male bullet connectors

• Three 3.5mm female bullet connectors

• Heat shrink for all bullet connectors

• Screw set with 4 screws

• One 2.5mm hex wrench

Requirements

• Installation of motor

• Soldering the bullet connectors to the motor wire

Comments

• Best used with a micro heli with a 3S LiPo setup

• Works with E325 Thunder Tiger Helis