Thunder Tiger 3837-K22 MD-530 Scale w/Titan 50

This is the glow powered, Thunder Tiger Raptor 50 Titan Helicopter Kit with the Pro .50H Engine and the MD-530 Fuselage in Dark Green Paint Scheme.

For Advanced to Expert Helicopter Pilots 14 Year of Age and Older.

Features

• Thunder Tiger 3837-K22 MD-530 Scale w/Titan 50

• Control System: 90° Collective Cyclic Pitch Mixing with hardened main shaft and push-pull collective pitch and elevator control systems

• Autorotation Gear: Constant drive design allows aerobatics during autorotation

• Engine: Thunder Tiger Pro .50H ringed with Schnuerle porting and two- needle carburetor

• Exhaust: Polished natural finish aluminum

• Main Blades: Carbon construction 24.4" (620mm) long

• Flapping Damper: Nonlinear for aggressive 3D flying

• Tail Drive: Belt type with metal guide pulleys on body and tail

• Tail Boom: Aluminum, longer than the Raptor 50 V2 to fit 620mm blades

• Body: Fiberglass construction with clear molded windows and dark green military paint scheme

• Tail Rotor Blades: White plastic

• Vertical Fin: 3D design, constructed of carbon

• Aileron and Elevator Linkage: Push-pull

• Landing Gear: Nylon with aluminum skids

• Fuel Tank: 11.5oz (340cc)

Specifications

• Fuselage Length: 48.03" (1220mm)

• Fuselage Width: 5.51" (140mm)

• Total Height: 15.75" (400mm)

• Main Rotor Diameter: 54.53" (1385mm)

• Tail Rotor Diameter: 9.33" (237mm)

• Gear Ratio: 1:8.5:4.56 standard

• 1:8.73:4.56 optional

• Fully Equipped Weight: 6.6lbs (3000g)

Contents

• ARF Thunder Tiger Raptor 50 Titan Helicopter Kit with MD-530 Body, Pro .50H Engine, Exhaust Pipe, Carbon Blades, Landing Gear, Fuel Tank and Instruction Manual

Requirements

• Radio: At least 6-channel

• Servos: Four standard with one digital rudder servo

• Gyro: Heading lock

• Flight Battery: 4.8V NiMH, at least 1200mAh

• Glow Fuel: Heli blend 15-30% nitro content

• Glow Plug: Medium length, medium heat range

• Starting Shaft: 6mm hex size

• Flight Battery: 4.8V 1200mAh NiMH

• Electric Starter: 12V .90 size

• Remote Glow Starter

• Building and field equipment

Comments

• For Replacement Ball Bearings use:
     Qty.    Size             Location Qty.                          Bearing
      2        8x12mm     R& L Elevator Subassembly        1 DTXC1581
      2        4x8mm       Elevator Push/Pull                     1 DTXC1511
      4        6x13mm     Rotor Shaft                              2 DTXC1573
      4        5x10mm     Tail Rotor Hub                          2 DTXC1535
      2        4x7mm       Tail Pitch Control Lever              2 DTXC1507
      4        4x7mm       Flybar Assembly                       2 DTXC1507
      1        5x11mm     Tail Idle Pulley                         1 DTXC1547
      1        4x7mm       Pitch Push-Pull Lever                 1 DTXC1507