Thunder Tiger 4854-K10Y Raptor 50 Titan SE Kit Yellow

This is the glow powered, Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Yellow Color Scheme. For Advanced to Expert Helicopter Pilots 14 Year of Age and Older.

Features

• Thunder Tiger 4854-K10Y Raptor 50 Titan SE Kit Yellow

• Control System: 90° Collective Cyclic Pitch Mixing with new design for main rotor hub and mixing lever that delivers +/-15° collective pitch for very fast pitch response

• Autorotation Gear: Constant drive design allows aerobatics during autorotation

• Flapping Damper: Nonlinear for aggressive 3D flying

• Tail Drive: Belt type with metal guide pulleys on body and tail

• Tail Boom: Aluminum

• Body: FRP construction, painted, with decals applied, carbon fiber look canopy area

• Tail Rotor Blades: White plastic

• Vertical Fin: 3D design, constructed of carbon

• Aileron and Elevator Linkage: Push-pull

• Landing Gear: Nylon with aluminum skids

• Fuel Tank: 11.5oz (340cc)

Specifications

• Fuselage Length: 48.03" (1220mm)

• Fuselage Width: 5.51" (140mm)

• Total Height: 15.75" (400mm)

• Main Rotor Diameter: 54.53" (1385mm)

• Tail Rotor Diameter: 9.33" (237mm)

• Gear Ratio: 8.5:1:4.56

• Fully Equipped Weight: 7.5lbs (3400g)

Package Contents

• ARF Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Body, Landing Gear, Fuel Tank and Instruction Manual

Requirements

• Radio: At least 6-channel

• Servos: Four standard with digital rudder servo

• Gyro: Heading lock

• Flight Battery: 4.8V NiMH, at least 1200mAh

• Engine: .50 cu in heli type

• Exhaust: High-flow 3D type

• Main Blades: Carbon or fiberglass recommended

• Glow Fuel: Heli blend 15-30% nitro content

• Starting Shaft: 6mm hex size

• Flight Battery: 4.8V 1200mAh NiMH

• Electric Starter: 12V .90 size

• Remote Glow Starter

• Building and field equipment

Comments

• For Replacement Ball Bearings use:

• Qty. Size Location Qty. Bearing

• 2 8x12mm R& L Elevator Subassembly 1 DTXC1581

• 2 4x8mm Elevator Push/Pull 1 DTXC1511

• 4 6x13mm Rotor Shaft 2 DTXC1573

• 4 5x10mm Tail Rotor Hub 2 DTXC1535

• 2 4x7mm Tail Pitch Control Lever 2 DTXC1507

• 4 4x7mm Flybar Assembly 2 DTXC1507

• 1 5x11mm Tail Idle Pulley 1 DTXC1547

• 1 4x7mm Pitch Push-Pull Lever 1 DTXC1507