Thunder Tiger 8030 Governor Zero Alpha

This is the Thunder Tiger Zero Alpha Governor for Model Helicopters.

Features

• Thunder Tiger 8030 Governor Zero Alpha

• High-speed CPU and advanced feed forward control algorithm

• Bright LED for RPM display

• Adjustable gain for the control response

• Adjustable mounting devices

• Light weight and low power consumption

• Designed to govern the engine speed between 10,500-21,000 RPM

Specifications

• Digital advanced control

• Direct detection of engine rotation

• RPM resolution: .0003HZ

• Speed stability accuracy: 1%

• Control response: 14ms

• Range: 10,500-21,000RPM

• Operating voltage: 4.8-6.0v

• Current drain: 40ma at 4.8V

Contents

• One Zero Alpha Governor

• One sensor

• Two 4mm magnets

• Three 3mm nuts

• Two 3mm beveled washers

• Two 3x16mm socket head cap screws

• Three button head screws

• Three 3mm flat washers

• Two 4mm beveled washers

• Two 4x20mm socket head cap screws

• Instructions

Requirements

• Installation following the included instructions

• May require drilling your fan to accept the 4mm magnet - if the hole is not present in your fan