Thunder Tiger 9554 PRO .46M Inboard Ring
This is the Thunder Tiger Pro .46M 2-Stroke Inboard Marine Engine.
Features
-
Thunder Tiger 9554 PRO .46M Inboard Ring
-
Side exhaust
-
CNC machined components
-
ABN piston and sleeve "A"luminum
piston, "B"rass cylinder liner that is "N"ickel plated
-
Water cooled cylinder head,
blue in color
-
Hyperutectic machined Al-Si
ringed piston
-
Dual ball bearing-supported
long style SG crankshaft
-
Two needle carburetor with 9mm
bore and oversized throttle lever for easy installation and operation of
throttle linkage
-
Three year limited warranty
through Hobby Services beginning at date of purchase
Specifications
-
Displacement: 0.455 cu in
(7.47cc)
-
Bore: 0.858" (21.8mm)
-
Stroke: 0.787" (20mm)
-
Practical RPM: 4,500 - 24,000
-
Output: 2.46 HP @ 23,000 rpm
-
Weight: 12.35oz (350g)
-
Carburetor Settings-NOTE
carburetor is preset from the factory and requires only small adjustments
-
Needle Valve: 3 turns
counterclockwise from closed
-
Mixture Metering Screw: After
setting needle valve, set mixture screw flush with the end of the spray bar
and then turn upward about two turns
-
Height from Mounting Tab
Bottom/Top of Cylinder Head: 2.7" (70.1mm)
-
Height from Crankcase Bottom
to Top of Cylinder Head: 3.5" (88mm)
-
Width at Mounting Tabs: 1.9"
(50mm)
-
Width of Crankcase below
Mounting Tabs: 1.3" (33mm)
-
Center of Mounting Holes Same
Side: 0.71" (18mm)
-
Center of Mounting Holes
Opposite Side: 1.6" (42.9mm)
-
Center of Crankcase to Front
Bearing: 2.04" (51.7mm)
-
Distance from Backplate to
Front Bearing: 3.01" (76.4mm)
Package Contents
-
Thunder Tiger Pro .46M Marine Engine with carburetor, R2 long reach
glow plug, 2.5mm hex wrench, decals and instruction manual
Requirements
Comments
|
|
