Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF TOPA0906

This is the radio controlled, glow or electric powered, almost ready to fly Top Flite Cessna Skylane Gold Edition Airplane. IMAA Legal

Features

• Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF TOPA0906

• Construction: Balsa and ply

• Wings: One-piece with plywood wing joiner

• Aileron Control: Dual servo

• Covering: Top Flite MonoKote

• Cowl: Painted fiberglass

• Cockpit Detail: Seats and instrument panel

• Lights: Two landing lights in cowl, one navigational light on each wing and red MARS beacon light on top of fin (requires separate receiver battery)

• Spinner: Polished aluminum, 2.25" (57mm) diameter

• Landing Gear: Main, two piece fiberglass, Nosegear 0.20" (5mm) diameter prebent wire

• Wheel Pants: Constructed of fiberglass, white in color

• Wheels: Three foam, two main 3.25" (82mm) diameter, one nosewheel

• 2.75" (70mm) diameter

• Engine Mount: Two-piece composite

• Fuel Tank: 14oz (420cc)

• Building Time: Ready to fly in 15-20 hours

• Warranty: Top Flite® Models guarantees this kit to be free from defects in both material and workmanship at the date of purchase.

• This warranty does not cover any component parts damaged by use or modification. In no case shall Top Flite's liability exceed the original cost of the purchased kit.

Specifications

• Wingspan: 81 in (2060mm)

• Wing Area: 898 sq in (57.9 dm2)

• Weight: 11.5 - 12.5lb (5220 - 5670g)

• Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm)

• Length: 64 in (1630mm)

• Airfoil: Semi-symmetrical

• CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of the wing

• Control Throws-     Low Rate                   High Rate

• Elevator:                 3/4" (19mm) 10°     1-1/16" (27mm) 15°

• Rudder:                  5/8" (16mm) 9°       1" (25mm) 15°

• Ailerons:                 1/2" (13mm) 14°     5/8" (16mm) 17°

• Flaps:                     1/2 - 1" (25mm)       18° down

• full -                       2" (51mm)               36° down

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, fixed wire landing gear, aluminum spinner, dummy radial engine, two main wheels, two tail wheels, two-piece nylon engine mount, fuel tank, plywood servo and retract trays, aluminum wing joiners, hardware package, instrument panel decal, painted pilot bust, and photo-illustrated instructions

Requirements

• Engine: .60-.91 cu in (10-15cc) two-stroke OR

• .91-1.20 cu in (15-20cc) four-stroke OR

• Motor: Rimfire 120 (50-65-450) Outrunner

• LiPo Batteries: Two connected in series if using electric motor

• Radio: 6-channel

• Servos: Six standard with at least 44oz/in (3.2kg/cm) torque

• 24" (610mm) Servo Extensions: Two for ailerons

• 12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip lights

• Y Harnesses: Two for aileron and flap surfaces

• Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights

Comments

• Following are the Top Flite MonoKote colors used to cover this model and order numbers for 6ft rolls;

• Jet White TOPQ0204

• Sapphire Blue TOPQ0226

• Dove Gray TOPQ0211

• Black TOPQ0208