X-Charger C6 6A 1-6 Cells
Digital LiPo Balance Charger
Optimized Operating Software:
When charging or discharging, it has an "AUTO" function that set the
charring current automatically. It can prevent overcharging and lead to an
explosion by user incorrect setting.
Dual Power Input: It employs
the circuit that maximum output power of 50W for charging. As a result, it
can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries
with maximum current to a higher voltage of battery. Please refer to
"Maximum circuit power charge"
Individual Voltage Balancer
for Lithium Batteries: It builds in cell voltage balancer. It does not
require external balancer when charging Lithium batteries (LiIo/LiPo/LiFe)
for balance charging.
Balance Individual Cells on
Discharge: It also can monitor and balance individual cells of the Lithium
battery pack during the discharge process, as well as the charge process. If
the voltage of any one cell varies abnormally, the process will be stopped
with the error message.
Accept Various Types of
Lithium Battery: It accepts three types of Lithium batteries - LiIo, LiPo
and LiFe. They have different characteristics by their chemistry, such as
minimum, maximum, and charge termination voltages.
Lithium battery Fast and
Storage mode: Fast charge model reduces the charging time of the
Lithium battery and the Storage mode controls the final voltage of the
battery to be suit for long time storage.
Data store/load: It can store
maximum 5 data of different batteries. You can establish the data contains
program setting of the battery to the charge or discharge continually. These
data can be called out at any time you need and the process can be executed
without program setting.
It can perform 1 to 5 cycles of charge>discharge or discharge>charge for
battery break in/refreshing and balancing.