Extreme X-605 1-6 Cells
Digital Multifunctional 5A LiPo Balance Charger
Microprocessor: eXtreme X-605 Balance Charger is a rapid charger with a high
Internal independent lithium
balancer: X-605 employs an individual-cell-voltage balancer. It isn’t
necessary to connect an external balancer for balance charging.
Adaptable to various types of
lithium battery: X-605 is adaptable to various types of lithium batteries,
such as as Li-ion, LiPo and the new LiFe series of batteries.
Maximum safety: The automatic
charge termination program is based on the principle of the Delta-peak
voltage detection. The upper limit of the charging current can be set up
when charging NiCd or NiMH battery. If the charging capacity exceeds the
limit, the process will be terminated automatically when you set the maximum
Processing time limit: You can
also limit the maximum process time to avoid any possible defect.
Data store/load: The maximum
five batteries’ data can be stored for users’ convenience. You can keep the
data pertaining to program setting of the battery of continuous charging or
discharging. Users can call out these data at any time without any special
Optimized operating software
X-605 features the so-called AUTO function that set the feeding current
during the process. It can prevent the overcharging. It can disconnect the
circuit automatically and alarm once detecting any malfunction. The programs
are controlled through two way linkage and communication, to achieve the
maximum safety and minimize trouble.
Balancing individual cells
battery discharging: During the process of discharging, X-605 can monitor
and balance each cell of the battery individually. Error message will be
indicated and the process will be ended automatically if the voltage of any
single one cell is abnormal.
Fast and storage mode of
lithium battery: Purposes to charge Lithium battery varies, ‘fast’ charge
reduce the duration of charging, whereas ’store’ state can control the final
voltage of your battery, so as to store for a long time and protect useful
time of the battery.
(optional): The battery’s internal chemical reaction will cause the
temperature of the battery to rise. If the temperature limit is reached, the
process will be terminated.
Input power monitoring: To
protect the car battery used as DC input power from being damaged, its
voltage keeps being monitored. If it drops below the lower limit, the
process will be ended automatically.
operable for battery refreshing and balancing to stimulate the battery’s
CE and FCC approved
Operating voltage range: DC
11.0 ~ 18.0 Volt , AC to DC adaptor (DC11.0 ~ 18.0V/5A)
Circuit power: Max. charge
power 50W , Max. discharge power 5W
Charge current range: 0.1 ~
Discharge current range: 0.1 ~
Current drain for balancing
NiCd/NiMH battery cell count:
1 ~ 15cell
Li-ion/Polymer cell count: 1 ~
PB battery voltage: 2V ~ 20V
Weight: 277g (Net Weight)
Dimensions: 133 x 87 x 33mm