Thunder T6 1-6 Cells 4
Independent Output Digital Multifunctional Balance Charger
High Performance Micro
Processor: Thunder T6 Multi Charger & Balancer is a rapid charger with a
high performance microprocessor.
Individual Voltage Balancer:
Thunder T6 has an individual-cell-voltage balancer inside. This does not
require any extra balancer when charging Lithium batteries (Lilo/LiPo-LiFe)
for cell voltage balancing
Suitable for various types of
Lithium batteries: Thunder T6 can accept three types of Lithium batteries – Lilo, LiPo and LiFe. They have different characteristic by their chemistry.
You can select any one of them that you are going to process before the job.
For their specifications, refer Warning and safety notes section.
Maximum safety: The automatic
charge termination program works on the principle of the Delta-peak voltage
detection. Auto-charge current limit: When charging NiCd or NiMH at AUTO
current mode, you can set the upper limit of charge current to avoid from
high current charging. Capacity Limit: If the charging capacity exceeds the
limit the process will be terminated automatically when you set the maximum
Processing time limit: You can
also restrain the maximum process time to prevent from any possible defect.
Data store / load: For users
convenience it can store 5 data of different batteries per charger (20 in
total) You can establish the data contains program setting of the battery to
charge or discharge continually. These data can be called out at any time
you need and the process can be executed without program setting.
high-performance circuit: Thunder T6 employs the circuit that has maximum
output power of 200W. As a result it can charge up to 15 cells NiCd / NiMH 6
cells lithium with max current of 5A and 8 series of Lithium batteries with
maximum current of 7.0A. Furthermore the cooling system is so efficient that
can hold such a power without any trouble of running the CPU or the
Optimized User Interface:
Thunder T6 has an AUTO function that sets the feeding current automatically.
It can prevent the over-charging. Program in the unit are controlled with
mutual links and communication for every possible error for maximum safety.
Balancing individual cells
battery discharging: Thunder T6 also can monitor and balance individual
cells of the Lithium battery pack during the discharge process. If the
voltage of any one cell varies abnormally, the process will be stopped with
the error message.
Lithium battery Fast and
Storage mode: You can charge Lithium battery for special purpose. Fast
charge reduces the charging time of Lithium battery and Storage mode
controls the final voltage of the battery to be suit for long time storage.
(Optional): The temperature of the battery on charging will be rise by its
internal chemical reaction. If you set the limit of temperature the process
will be expired forcibly when the limit has reached.
Input power monitoring: To
protect the car battery using as input power from being damaged the voltage
of it always monitored. If it drops below the lower limit the process will
be ended automatically.
Cyclic charging / discharging:
Perform 1 to 5 cycles of charge / discharge or discharge / charge
continually for battery refreshing and balancing.